Tip:
Highlight text to annotate it
X
Package contents.
Two straps.
Four nose cones.
Two inflatable tubes.
One hand pump.
Feed anchor knots through the nose cones.
Push knots down flush into the cones.
Inflate tubes until they are "rock hard" firm.
Close the valve with provided attached plug.
Starting at the top on one side of the board feed the straps through the nose cones.
Run the straps under the board and feed it through the opposite training rail, starting at the bottom.
Feed straps through buckles.
Center rails along the sides of the board and cinch down firmly on the straps.
Do not push valve stems in. Angle them inward up against the board's rails.
Roll up excess straps and secure them under elastic bands.