Moldmaking

Hi, this is Jon and in this clip we will be trimming our opening. Right now our door is dry-fit into our opening, meaning we just set it in place. And what I notice is that my inside frame of the door...

This is one for all you Baja owners out there! We're going to show you something that will dramatically increase the durability and strength of your Baja: the Power Control Slipper Clutch set!...

Here we have again a wall made up of three different layers. The first layer is wood siding, which is outside, obviously. And its R-value is given as 0.81, whatever the thickness might be of that wood...

So, you’re interested in the pro bono program, but you’re not sure what it is or who can use it. Maybe you already know a little about it but you want more information on how to qualify and take...

In this clip I'm going to talk about, if you would like to apply hand prints or foot prints onto your completed belly cast, for decoration. On this particular belly, we have the child?s foot...

My name is Matthew DeBerrins and I am an apprentice moldmaker with Prosin Molds. Prosin Molds designs and manufactures injection molds for the plastics industry, such as consumer products, medical and...

Okay, we'd now like to show you how to make a carrier board, which is basically a siliconized board. What we're using here is the white display board; the 2 mille or 2,000 micron white...

This video is brought to you by HobbySilicone.com, quickly I'll show you how to make a two-part mold from this hand sculpture that I made in wax. You will need a sharpie marker - what I like...

The quality of a medical product starts with the selection of a suitable material. This determines not only the functionality but also biocompatibility and ultimately the safety of your product....

The following is another product introduction from Fishman Corporation – Innovating Fluid Dispensing Today I am introducing the Push-To-Connect Dispense Gun. The SmartDispenser Push-To-Connect...