Brake pad

On behalf of Expert Village, my name is Seth Williams. I work for D-K Service and I am here to tell you about simple street bike brake repair and inspection. This is the rear brake caliper off of this...

On behalf of Expert Village my name is Seth Williams, I work for D-K Service and I'm here to tell you about simple street bike brake repair and inspection. Now we're going to be...

MARK BLOCKER: Okay. In this segment, I'm going to cover checking the braking system and seating the pads. What I'm referring to when I say seating the pads, if you remember when I put...

Alright in this section, we're going to show you how to remove the brake calipers off the wheel. That's the, the next step. Once you get these off you can go ahead and remove the axle...

MARK BLOCKER: Okay now, that we've got the brake caliper on, we need to put that dust cover on. And it was held on by two little 6mm bolts with 10mm heads, and if you remember the lower one...

MARK BLOCKER: In this segment, we're going to cover cleaning the brake parts part two. Okay, now that we've got the caliper mounting bracket and--where the brake pads attached to it...

MARK BLOCKER: In this segment we are covering and installing the wheel. All I need to do--I just want to lift it up, set it on your lug nuts, slide it over and just kind of hold the wheel in place....

MARK BLOCKER: Okay, we've completed our actual brake repair. Prior to doing anything else, we need to visually inspect the [INDISCERNIBLE] brake system which basically entitles us--or not...

MARK BLOCKER: In this segment, we're going to cover installing the wheel. Part of putting the wheel on, I just want to remind you what we're showing you for our video training purposes...

My name is Jon with Expertvillage.com and in this video clip we will go through the final procedures for replacing our brake pads. Since we depressed the caliper piston the brakes will be spongy when...