Today we're going to review part number AM3S360. This is a Kenda Loadstar Tire size ST205/75D14 bias trailer tire. It's mounted on a 14-inch Dexstar Galvanized Steel Wheel. This wheel...

1

annotations

Today on our 2006 Pontiac Montana well be installing the Curt Hitch part number 13344. This application does come with the manufacturers load leveling system that will need to be modified on the...

1

annotations

Today were looking at the Optronics Sealed, 6-1/2 inches Oval LED Trailer Stop, Turn and Tail Light, part number STL72RB. This light functions as a three signal light, stop, turn and tail light. It...

1

annotations

Today on our 2012 Chevy Cruze we'll be installing the Curt Hitch, part number C11282. Next we'll give you a couple measurements to assist you selecting accessories for your new...

1

annotations

Today on this 2012 Chrysler Town and Country were going to install a hidden hitch part #: 87451. This will be comparable to the draw type hitch part #: 75579. Here are a couple of measurements that...

1

annotations

Today on our 2012 Kia Soul we'll be test fitting the Kuat Alpha aluminum bike carrier, part number A103-WHITE-114. To begin the test fit we'll slide the shank of the carrier into the...

1

annotations

Today on our 2013 Chevrolet Tahoe, we'll be test fitting the Thule Doubletrack Platform Style 2 Bike Rack for inch and a quarter and 2 inch hitches, Part Number TH990XT. We'll...

1

annotations

Today on this 2010 Jeep Compass, were going to be installing Draw Tite Hitch, part number 75712, and this installation will also apply to hidden hitch part number 87606. Before we get started with our...

1

annotations

Today on our 2012 Honda Civic well be test fitting the Rhode Gear Highway 2 bike carrier for both inch and a quarter and 2 inch hitches part #: RG8015220. To begin our test fit well simply slide the...

1

annotations

Today on this 2005 Chrysler Pacifica, we are going to install part number 12262 from Curt. This is what the hitch looks like when it is installed. Now we will go ahead and give you some measurements....

1

annotations