Tip:
Highlight text to annotate it
X
Be bold with CADCUT Neon, coming up next.
Hi I'm Josh Ellsworth with Stahls' CADCUT direct and welcome to our product demonstration
of CADCUT Neon.
CADCUT Neon is that bold product that's really gonna pop off a shirt and stand out.
It's intended for cotton and polyester garments, and we offer the product in four colors.
Watch how we cut it, weed it, heat it... showing you CADCUT Neon.
When cutting CADCUT Neon be sure to set your blade depth and downforce accordingly.
On a scale of 0 to 250 grams of downforce this material cuts at between 160 and 200
grams.
Neon is very easy to weed and also very easy to see the cut lines.
It's on a non-pressure sensitive backing, which means it's not sticky.
So you just simply grab the edge and pull the excess material away.
I would rank this material 4 1/2 out of 5 stars for ease of weeding.
You also wanna be careful about how much detail you try to cut with Neon.
Now we'll heat apply the Neon material.
320 degrees, 10 seconds and a medium pressure or a pressure of 4 on the Hotronix clam.
Preheat your garment to remove the moisture and wrinkles.
Position the design, and heat apply.
The backing can be removed once it's cooled down.
And this is it our finished result using CADCUT Neon in the color orange.
The product is also available in pink, yellow and green.
A product that jumps right off the garment that's lab certified for the following.
CADCUT Neon, very easy to use, very cost effective for you and your customer.
What else would you expect from the invventors of CADCUT!