Tip:
Highlight text to annotate it
X
Okay, so now I'm going to show you how to sew it on, like how--the way I do, and what
I do, is I just sew it together while the drawstring is inside already, and that's how
I did these--both of these, and I like the way it looks better, just because it just
lays better, the tabs are in there nicer. And when you look at these, they kind of crinkle
up, and it's just--if I lay it on here, and then wrap it around and do it, I know that
they fit in there nice and perfectly. Okay, so what I'm going to do is wrap it around
one side, have it sticking out on--underneath, just like that, just kind of sandwich it in
there. Then we still need to make sure everything is lined up, so when it's coming out right
here, you just make sure that they're turned both the same way. Okay, so now I'm going
to lay the other one next to it--not too close, because we want to be able to sew in between
them. Wrap it around on that side. Now I'm going to just going to lay it upside down
like this, and just have a look at it. I'm going to turn my seam under just a tad on
the backside. Okay, everything is looking good. I'm going to put a pin right here in
between. Remember, if this is just too much for you, just do it the way I did it the first
time, and that turns out just as good. But I like doing it this way just because, I just
like the way it looks. Okay, so I'm going to bring it over here. I have that pin right
here in the middle; I'm just going to slip it out, because I'm going to sew it right
now. Okay, make sure that these guys are pulled apart just a little bit. There we go. Okay,
and there's that side. Let me clip all these threads off, I think that we got it. Let's
see, yep I got it. And if you didn't get it, that means that part of this, one of these
straps got stuck in this seam. Happens to me all the time, all you'll have to do is
just take it off and sew it again, and make sure that they're separated. See how far they're
separated right there in the middle? So anyways, that's sewing the drawstring on the way that
I like to do it. Then this was sewing the drawstring on by making the casing, then slipping
it in. The same difference, they look the same way. So in the next clip, I'm going to
show you how to finish off these little ties, to make it look nice and finished, and that
will be just about it for this.