Tip:
Highlight text to annotate it
X
Hi I'm Karen for Expert Village. Alright, now we will place our strips along the edge.
You will need a little bit of the decoupage glue, just a light coating. And then you want
to place that strip right along the edge and just slightly overlap and pull it nice and
straight and then we will piece in another piece, a little bit more of the glue, just
a light coating
and match that up. Now if it doesn't match exactly you might want to trim it a tiny bit
with your scissor, just until you get a pretty perfect match. I am just taking off a very
tiny sliver of the paper just so I can get those ends to match and you kind of just very
slightly overlapping and tack that down and then trim. Then we will start, then we will
make our, put our strip along the bottom edge. A little bit of glue. This will cover up any unevenness that we
have along the bottom, along the edge we just will cover that unevenness up. Okay and just
continue around the piece until you have put the boarder all the way around.