Tip:
Highlight text to annotate it
X
Today we are going to show you how to install the Rearview Mirror Adhesive from Loctite
part number LT37438. The first thing you want to do is locate the mounting area where the
mirror was and then take a marker or a crayon and circle that area on the windshield so
we know where to readhere the mirror once we get the adhesive on. With that marked we
can go back in and we want to clean the remaining adhesive off the inside of the window. We
just want to make sure we wipe that clean with an alcohol cloth or paper towel. We not
only want to do this on the windshield but we also want to do it to the button of the
rearview mirror itself. 00:35 Next we will move on to our rearview mirror
and what we want to do is locate the button that was adhered to the windshield and we
need to get this removed from the rearview mirror. On this particular one there is a
set screw on the inside here and loosen that up and the button will slide out the back
side. Next take the components of the Loctite kit and remove them from the package. We have
got the adhesive here and then we have got our activator ampule here. We are going to
start by applying the activator onto not only the button but the windshield. You can see
this has got a paper sleeve on it, if you remove that you can see there is a tip and
the activator itself is inside a vile inside this plastic tube. I am going to put the paper
cover back on and we are going to squeeze the vile until it breaks. 01:32