Tip:
Highlight text to annotate it
X
This video is going to demonstrate how to attach our 7Flex Monitor Arm to
a unistrut.
The first thing you do is open your 7Flex monitor arm
and make sure you have all the parts that are included inside,
all the major components.
What you'll do is you'll take the mount
out of the back right corner of the box, and the first thing you're going to need
to do is to disassemble the bottom screw piece out of this mount.
To do that we can use the included
allen wrench
and simply
undo this screw
and the bottom piece can be removed or discarded.
The next thing we're going to do
is place the two included cone nuts
into the unistrut using the spring as a tensioner.
So, we simply insert those into the unistrut,
in the location of your choosing,
and they will hold themselves in place.
The next thing we do is include our basic mount
put the included screws and washers through the holes,
and finger tightened them
to the location of your choosing
with the mount facing
upwards.
Make sure to carefully align
the bottom cone nut
and the bottom screw for the mount.
Place the second screw in the hole
and finger tighten.
Once it's all aligned and straight
within the channel
you can tighten with the screwdriver.
Now your mount is firmly in place.
After your mount is firmly in place, you take the main arm of the 7Flex
and simply
drop it into its mount.
Then you take the final monitor arm bracket,
you can attach this to your monitor
and simply slip it into place.
If you have a small VESA monitor mount,
it will attached directly to the small bracket,
if you have a larger monitor mount
you'll need to use the included screws
to put that mount over the small mount.
Attach your monitor and you have a completed 7 arm monitor bracket.