Tip:
Highlight text to annotate it
X
Today on this 2007 Honda Ridgeline we're going to install part number 118400 from Curt. First
step is to go ahead and lower the tailgate and remove the two screws that attach the
tail lights to the vehicle on the drivers side. We'll go ahead and remove the tail lights
and then disconnect the wiring harness. Now there's two little tabs. There's one tab that
connects the wire harness to the body, you have to push that away to release it and one
the second tab we push down and that will allow u s to pull the connector apart. We'll
go ahead and repeat the same process over on the passenger side.
Now we can go ahead and start installing the wire harness. We'll take the four pole end
of the harness and drop it down through the space between the bumper cover and the body
on the drivers side. We'll also do the same thing with the one half of the T connector
with the green wire. We'll run that down through as well. Then we'll lower the module down as well.