Hey everybody! Randy from Johnson Creek here
a part of your research and development team.
And I'm here to introduce to you today
a great new product from us. It's called the Johnson Creek Valet.
And what the Valet is--is a system
to help you fill your cartomizers completely every time that you need to do that.
First off, of course, grab your favorite bottle of Smoke Juice
and give it a good shake. We always suggest that you do that.
And, you just removed the original cap that came on it.
In the first part of the system that you're going to be
looking at here is a custom-made cap
for the Smoke Juice bottle.
It comes with his little plug on here. You're going to want to remove that.
And put this custom cap right back on to the bottle like this.
Alright, first step is done.
The second thing you're going to do is grab a cartomizer.
Rev 2.0 or Rev 3.0 that doesn't make any difference
even if it's been filled once already or if it's blank. Either one.
Remove that black end cap like you normally would when you fill.
Then take a cartomizer with the thread side
and put the thread side down into that custom-made bottle cap.
Alright, that part is done.
Secondly, in the kit you'll have a custom-made syringe piece here for you.
And, this piece just goes right on the top of the cartomizer.
Just like so.
And, your Valet is actually completely assembled now. Ready to use.
To fill the cartomizer inside there, just go ahead and tip the bottle over.
Hang on to it.
And, pull the plunger down a bit here until you see some Smoke Juice coming through.
It doesn't have to be all the way to the end.
Just as long as there's some in there, you should be just fine.
Once you've done that, let it sit for a couple of seconds.
Flip it over and push that down to clear out that center tube. Alright.
And, we also suggest, maybe just you do it one more time just to be completely sure about it.
And, once you've done that, flip it back over. Push that down again.
And, you might wanna go ahead give it a couple pushes like this
just to make sure that center tube is all cleared out.
Go ahead and remove the custom syringe end.
And then, by just pulling up and twisting maybe a little bit
remove the cartomizer from there.
If there's any kind of residual on there, you just go a head and just wipe that down real quick.
Replace the tip onto the cartomizer.
And, there you have a completely filled cartomizer.
No questions about how much level is in there. It is completely saturated.
And, should be ready for you to go ahead and use and enjoy.
The last thing we suggest that you do is go ahead and
replace the red plug in that custom piece.
Take that off and replace the original cap back on your Smoke Juice
for storage and whatnot.
And that's it.
Again, a completely fill cartomizer. I hope you're as excited about this is we are bring it you.
It's been real fun to make this and get this ready for you.
If you have any questions about this or anything else, look under the "Learn" section on our website.
Bunch of How-To videos out there.
Or, of course, you can reach out to us at...
Thanks for joining my today. I hope you're excited about it. Really hope you enjoy it.
Have yourself a great rest of your day.