Tip:
Highlight text to annotate it
X
Welcome to Allegro Industries
Hi everyone, Allegro Al here
Today I am going to give you some great information on a variety of sampling
products used in the environmental industry
Allegro offers a wide variety of high volume sampling pumps for use in
collecting hair samples containing asbestos,
lead, mold and various dust and particles
With the widest range of pumps in the industry
we can provide Rotary Vane,
Diaphragm,
Linear and even DC powered units
If you need to collect an area sample we can help you find the right
pump. For twenty years Allegro Industries has offered sampling pumps to the
environmental marketplace and has become the market leader in high volume
sampling innovation
Always offering the best price and delivery
Allegro is the answer to your sampling needs. For pumps, accessories and cassettes
The Allegro Rotary Vane pump uses carbon vanes that operate on a rotor
providing a smooth consistent draw of air
The pump includes a handle,
rubber feet,
an on off switch and adjustable regulator to adjust airflow
The unit is very compact which makes for a quick and easy transport and setup
Simply attach five-feet tubing
to the inlet of the regular then thread the opposite end of the tube through a stand
A cassette is attached to the tube
and you are ready to draw samples. Asbestos, lead, mold
and toxic dusts are a few of the samples that can be drawn
using the Allegro Rotary Vane pump
The Diaphragm sampling pump is available with or without a stand
and tests for asbestos, lead, mold, dust and other toxins. This pump is quiet,
economical and also has an adjustable regulator
To set up just add 5 feet of tubing to the inlet of the regulator
Then attach the other end of the tubing to a cassette
That is it, you are setup and ready to draw samples. The Allegro D2 pump is a
linear style pump that offers quiet performance
with a built-in flow meter. The primary function of this pump is to collect
mold using any of the mold cassettes available
Just attach 5 feet of tubing to the inlet
Next attach the other end of the tubing through a stand
Attach the cassette to a tube and you are ready to go
Allegro also offers a DC sampling pump which also samples for only mold
This pump is quiet and battery-operated which is great for remote locations
The DC sampler comes with a special stand that attaches to the bottom of the unit for
a quick and easy setup and sampling
Instead of using tubing to attach the sample cassettes they are attached
directly to the top
Before collecting any samples it is very important to set the proper flow rate
Some of our pumps have built-in flow meters or an Allegro flow meter can
be used. Once the flow meter is attached turn the pump on and adjust the regulator
making sure the flow meter reads between ten and fifteen liters per minute
Once the flow has been set Allegro pumps have a locking ring on the regulator
to make sure that your air flow does not change and your samples stay accurate
For detailed information on setting up pumps please refer to the instruction
manuals or visit our website
Thanks for watching