Tip:
Highlight text to annotate it
X
Today, on this 2010 Lexus RX350 were going to do a test fit of part number A30901 from
Sportrack. A few things to know between this bicyle rack, that it will work with inch-and-a-quarter
receiver hitches, both class I and class II, and this will also work with a 2-inch receiver
hitch with the included spacer and thats what well be working with today. Well start off
our test fit by installing the bike rack into the hitch. Well tighten down the anti-rattle
bolt and install the safety pin on the other side. And then, well go ahead and get a couple
of clearance measurements.From the bike rack to the bumper at its closest point will be
8 inches. Ground clearance at the very back of the rack will be 19 inches.
Now well go ahead and lower the center post and check for access to the back of the vehicle.
All right, that looks good. Now we can go ahead and load up a bike. First thing well
do is make sure that the straps are out of the way in the wheel loops. Then, we can go
ahead and
load our bike.