Tip:
Highlight text to annotate it
X
Okay. I have glued those pieces on to the sides.
I glued the other one here.
Now, all I have to do is glue these two parts together
You can see it fits in there properly.
So I'll glue those parts together and come back.
All right, I have glued these two together
and the trigger has also been attached.
And YES! I am planning to use a screw this time.
Only thing is, the trigger swings too far back.
So to prevent it from swinging too far back,
what I have done is,
I took a piece of cardboard
and I cut it into a small, rectangle-like shape.
And I cut it such that it fits in here.
And now the trigger does not swing too far back.
It prevents it from swinging too far back.
And also, the surface is very uneven over here.
So I'm going to use this piece of cardboard to cover it all up.
And I have also left enough space so that I can remove the trigger later.
So I am going to glue all these now.