Tip:
Highlight text to annotate it
X
Today, in 2007 Mazda 6, we're going to install product number P230100SW from Putco. This
is a pure H1 halogen headlight bulb. This is what it looked like before we install the
bulbs. Now, we'll go ahead and remove the factory bulbs and install new Putco bulbs.
Our headlight bulb is located on the outside of the headlight assembly towards the outside
of the body. Behind this cap is the bulb and then there's a little wire latch inside it.
We push down and move to the side. So you take that latch and we're going to push it
towards the outside a little bit and then it comes out of the hook, pull it away like
that, and pull up, then you can pull the bulb bell. We'll go ahead and reverse process to
install the bulb and we'll use a paper towel to hold it because we dont want to get any
fingerprints on the bulb itself. We'll go ahead and repeat the same process for the
other side, and we get the bulbs in. Let's go ahead and turn of the lights and turn on the headlights.