Tip:
Highlight text to annotate it
X
O.k. so one of the few last steps that we have are to go in and tack this placket down;
top placket down to the bottom placket, it's a very easy step and we're just going to pull
this over to the side; put a pin on top placket to lay it down and we still have that thread
hanging out from the piece that I didn't cut, and that was attached to the bottom placket
but if you did cut it you can just re-cut a piece and all it is; is tacking from here
to here and it's real loose, do not tack it tight or anything like that because it might
reshape the shape of your placket that you've worked so *** and then you re-thread my
needle for one second; this happens all the time to me, there we go and so just grab a
tiny piece. Oh; that will make it too tight, there you go and you'll be able to tell if
you did make it too tight because it'll show so I like to do just a real light light stitch
here; go, we're almost done with that; let me undo this, I want to make sure I'm not
getting it; oh I'm not, that's good; there we go and I'm going to tie this off just about
right here because I think that's going to be enough. And what we're going to do next;
I'm going to go ahead and mark where the buttons are, sew the buttons on and then we'll check
both cuffs to make that they're, sure that they're even and perfect, and I'll do that
in the next step.