Tip:
Highlight text to annotate it
X
Hello everyone, this video on Nexusx.ru web site.
Today I going to tell you how
to install multiroom on the Nexus 7 tablet
2013 Release
First of all on the tablet should be
get Root, if you do not have Root, you can
install it by clicking on
annotation. If you want to install
multiroom on the Nexus 4.
You can also install it by clicking on
annotations
Well, let's start
as a second OS, I will be installing Ubuntu Touch
links to all files is in the article
link to the article is in the description under the video
Download the required files to the tablet
mod kernel file and Ubuntu Touch ROM files
Ubuntu, by the way, will fail, but as
a MultiROM second OS it fits perfectly
For the installation you
need 2.5 GB
on your tablet
Enter to recovery by pressing
Volume down and Power clamped
simultaneously at boot tablet
and select Recovery Mode
confirm the selection by pressing Power
click the Install button
and points the way to our modified kernel
to Swipe, wait until the kernel will have flashed
Click Reboot System
and loaded into the system
after the system boots, go to
Google Play and download the app MultiROM Manager
after installation run the application
represent him Root Access
Just click Install as
already selected multiroom
and Recovery
click the Install button
and look forward to finishing the installation
press the button Reboot
after we pressed Reboot button
Our story goes back to recovery where
occurred
necessary changes
You don't need to enter anything
tablet will do everything
We have already see window
MultiROM
MultiROM successfully installed
and now we are going to install our
alternative firmware. Here you can already
use any firmware on your tablet
any firmware you want
I will install, as I have already mentioned,
Ubuntu Touch firmware. We have to
go to recovery. To do this, turn off once again
our tablet
and press the Power button and Volume down
During power on.
after we went to the Recovery
we need to select Advanced
then MultiROM and then press the button
Add ROM
I configure Ubuntu Touch
It is necessary to tick Ubuntu Touch
As ROM-type
then click the Next button
Here you have to specify the links to my
images that I downloaded
I do it all
first upper image
file names, so it is written, the main
to conform to the selected files
Then click the Install button
to Swipe
and now need to wait for about five
minutes for installing the Ubuntu Touch firmware
after installation, you have to press
Reboot System button
Tablet begins to restart and in
booting time we need tap
in any part of the screen
and after that you may select alternative
firmware. Choose Ubuntu touch firmware
and press Boot button
Now the tablet starts Ubuntu Touch firmware
The first boot
very long about five
minutes, so do not be nervous
Ubuntu boot necessarily, because
links are works and they were checked
not only on my tablet
and here, we have Ubuntu Touch
it works, it has some glitches
This is
unofficial version of the firmware. This is just a
Port of enthusiasts
That's all.
It was a video on the Nexusx.ru web-site
Subscribe, Likes!
Goodbye!