Tip:
Highlight text to annotate it
X
Alright so today on Repairs101 I thought I�d share with you some of the tips and tricks
I�ve learned over the years working with different kinds of drills.
Well I�ve said it before and I�ll say it again � wear your protective eyewear.
This old off-grid method of boring holes is called a brace.
Lots of different bits and specialty items are available for unusual jobs like this saw
drill bit. Mostly you�ll use high speed steel twist
drills for wood and metals. And thankfully most drills come with a keyless
chuck nowadays. Insert only the unhardened part of the shaft
into the chuck for a good grip on the bit. It�s important to start holes with a center-punch,
especially on ceramic tile which may shatter otherwise.
Have an assortment of clamps available to suit whatever it is you�re working on.
Sometimes I use these little aluminium angle bars to hold things down.
To keep the bit from getting dull immediately you want to keep it cool by lubricating it
and by slowing down the drill speed for harder materials and bigger bores.
Shut the power off, open the lid and use a fine screwdriver to roll the belt to the next
smallest sheave. Light tension on the belt is all that�s
required. Remember to wear your eye protection!
Alright thanks for watching and don�t forget to subscribe!