Tip:
Highlight text to annotate it
X
Today we have with us the 2012 Nissan Versa and we'll be test fitting the RockyMounts
JawBridge Roof Mounted Carrier, part number RKY0412. To fit this bike carrier to our roof
rack we'll set the head of the bike carrier up on top of our front load bar. We'll fit
the two front clamps around our load bar and tighten it down with the included Allen wrench.
Then we'll move to the back of the carrier and use the clamp with the wing nuts to secure
the carrier on our rear load bar. Once we've done that we'll need to make sure that our
wheel straps are open and then we'll be ready to load our bike. Once we've done that we'll
pick up our bike and place it in the wheel tray.
Once we steady the bike in the wheel tray we'll lift the JawBridge up and around our
bike's frame and secure the frame of the bike with the clamp. Then we'll go to each wheel
and tire and secure it with the wheel strap. And with that our bike is all loaded up and
we're ready to get on our way. That does it for the test fit of the RockyMounts JawBridge
part number RKY0412 on our 2012 Nissan Versa.