Tip:
Highlight text to annotate it
X
Today on our 2014 Ford Explorer we'll be test fitting the Convert-A-Ball Cushioned
Ball Mount for 2 inch hitches with a 3/4 inch rise or 2 inch drop rated at 10,000 pounds,
part number AMSC2. Before we begin our test fit, we'll first need to obtain the hitch
height of our vehicle. This is the measurement from the ground to the inside top of the receiver
tube. We'll get a measurement of about 20 1/2 inches. Keep in mind this measurement
may vary due to tire size, hitch style, or other aftermarket accessories. In the drop
position we'll begin our test fit by sliding the shank of the ball mount into the opening
of the hitch. We'll then secure it with the pin
and clip.