Tip:
Highlight text to annotate it
X
Today we are going to be installing wiring harness part number 118301 on a 2007 GMC Canyon.
All right, we are underneath the vehicle now, and we have removed the spare tire to gain
a little more access. Over here on the drivers side frame rail, we are at the rear end, where
the first cross member meets the frame, you can see the plug-in right here. And that is
the plug that we are going to be using to plug our T-harness into. To disconnect the
harness, we just want to depress the button here and pull them apart. And then we simply
want to take our T-connector and plug it in line. You want to push it in until you hear
the click. OK, and you can see here on the harness as
well we have a white wire with a ring terminal on the end of it that is going to be our ground
wire. I am going to go ahead and take the self-tapping screw that is provided in the
installation kit and just screw that on right there. You can also see on the back side of
the converter box here we have got double-sided tape. This nice, flat portion of the trailer
hitch is where I am going to mount it. And then I am just going to take the 4-pole here
and just feed it up and bring it out here at the front of the trailer hitch. And the
only thing left to do is to secure any loose wires that you may have, and you may use the
cable ties that are provided in the installation kit to do so. OK, and with the wires secured
up and out of the way, the installation will be complete. And this concludes the installation
of wiring harness part number 118301 on a 2007 GMC Canyon.