Tip:
Highlight text to annotate it
X
We're going to you a show you how to install this third brake light from
Recon. Basically, all you need is a simple, either a T20 Torx screwdriver
or, in this case, we're going to use our electric power drill with a T20
Torx head bit in.
The first step is to unscrew the factory light.
Okay, the next step is to gently pull the light from the body and then
unplug the factory harness. Simply push down on the retaining clip and
pull.
All right. The next step is to plug the factory installed harness into the
new third brake light and then replace the new third brake light in the
body molding spot. And then we want to replace the screws. It's important
to work the screws back and forth as to not crack the lens on the light
from over-torquing.
And there you have it. Now, let's go take a look at what this new third
brake light looks like. And that completes our installation of the third
brake light from Recon.