Tip:
Highlight text to annotate it
X
Today on this 2003 Chrysler Town and Country we are going to install 118376 from Tow Ready.
Our connection point is actually behind the taillight on the driver side. We are going
to go ahead and take out these two plastic rivets, make our connections, then run our
4-pull to the inside of the vehicle, and it will be stored in the jack storage compartment
when we are not using it. Okay so lets get started, take out our plastic
rivets, the light comes off relatively easy. You have to push the lock up towards the top
where it unlocks it, then squeeze it, and it comes right apart. Next what we are going
to do is modify our grommet here, because our connection points are going to be pushed
behind the far wall here. So go ahead and take out the grommet and make a split in it
and just remove the grommet. Next we are going to take our 4-pull end and push it
back inside here. There is some installation stuff like that you probably have to work your way around. Then we will
reach around from the inside, fromthe jack storage compartment, and pull it out.