Tip:
Highlight text to annotate it
X
Now we've allowed the edges that we glued shut to dry. You just want to make sure that
all that glue is dry and that you have all your edges filled in with a good bit of glue
because you don't want any of your filling to come out of your hacky sack. There's always
those little places you can miss between the stitching and the gluing. Then, what you're
going to do is you're going to take that open mouth of your hacky sack and you're going
to gently start to flip it inside out. You don't want to pull to hard because you don't
want it coming apart, your stitching to coming undone. Now, we're flipping it inside out
so you can start to see the decal which is going to be on the outside. Alright! So you
got that flipped inside out and we're going to pull all those edges through. Then we've
got the outside of our hacky sack and our decal back on and already to go. I'm just
going to start pulling my corners through because we don't want any big rolls of fabric.
Then, if you have any glue coming out through the backside you can just pull that off or
cut that away with scissors or an Exacto knife because you don't want to see any of that
on the outside. Once you've done all that then you’re ready to start filling your
hacky sack. We're going to do that through the opening, our mouth that we left for before.