Tip:
Highlight text to annotate it
X
So you can see I'm trying to work and build up a little bit before I actually begin laying
out the pieces with my adhesive. But one of the other things I want to mention is that
because you have this taped border, this layer, you can then apply pieces that actually overlap.
Because what's going to happen in the end is that we're going to establish the border
itself by cutting away and you'll see this in one of the final stages of the process.
You're actually going to end up cutting these away. Now you can choose to do that now or
you can work a little more quickly by just laying these out and laying them on to the
surface, overlapping on to the tape and then knowing that later on when you're going to
actually remove the tape, you're going to go along your edges with your exacto blade,
and you're going to cut those pieces off anyway, so they're going to get removed eventually.
So this is something that would kind of help you work a little more quickly, not quite
need to you know, go along and cut things apart as you're going, so often. But if you
wanted to do that again you could continue to do it that way if you wanted to be more
precise as you went along.