Tip:
Highlight text to annotate it
X
Today on this 2012 Subaru Outback Wagon were going to install part number 90208 from Hidden
Hitch. Now well go ahead and give you some measurements to help you out in selecting
some accessories such as a bicycle rack or a cargo carrier. From top of receiver opening
down to the ground will be 14 inches. From the center of the hitch pin hole to the edge
of the bumper will be four and a half inches. Now Ill go ahead and show you how the hitch
is installed. Our first step is to go ahead and remove the muffler.
Theres a couple ways you can do this you can spray down the rubber hangers and remove it
and leave it attached. How were going to remove the muffler itself theres two bolts on the
tailpipe that we can easily get to and to make things a little easier to see well go
ahead and remove the muffler. Next well go ahead and remove the heat shield for the muffler.
Next well have to drill a one-eighth inch access hole to the bottom of frame to get
our hardware into place. When we drill our access hole itll be approximately two inches
from the forward
heat shield attachment.