Tip:
Highlight text to annotate it
X
O.k, now I've cut my napkin for the front of the of the hand mirror. Now, this one you
want to trim even closer, so that it will only be a slight overlap. You don't want it
to be hanging over because this is already decoupaged, and we don't want to have to trim
here. It might damage what we've already done. So, you want this one to be just a very slight
overlap. Remember to remove the back layers, make sure you remove all the layers and then
again we will, you want to place it, place it on as evenly as possible. And, we're going
to work from here and down, like this. The middle down and out with the glue. You want
to wet your finger pretty well with the glue, and work your way down the handle. O.k. and
then up.
And when you have the whole surface, then you do the edges. And, you just sort of take
some glue and you lap that over the edge, like that. Always very gentle, you should
always feel like your finger is slick with glue, as you're working, not dry or sticky.
Make your way all the way around and then you let that dry and we'll be applying the
mirror and the trims.