Tip:
Highlight text to annotate it
X
Today on this 2010 Subaru Impreza, were going to install part number C56111 from Curt. The
first step is to go ahead and open up the back hatch so well get to the fasteners and
remove the two tail lights. The fasteners are gone. Well go ahead and pull the tail
light straight back then well get to the wire harness. Well push down a little tab so we
can remove it. Okay, with the drivers side done, well go ahead and repeat the same process
on the passengers side. Sometimes pushing that tab down needs a little
help. And now, we can
go ahead and start installing the wire harness. First, well take
the 4-pole wire and run it down between the bumper cover and now at the bottom. Well also do the same thing
with the wire harness with the red wire and T-connector.
Well take our T-connector with the yellow wire and plug it into the factory harness.