Tip:
Highlight text to annotate it
X
Today on this 2000 Chevrolet Blazer we are going to be installing part number 36244 from
Draw-Tite. This also applies to Hidden Hitch part number 90183. We are going to go ahead
and show you the mounting locations for our hitch. Its going to be the two factory bumper
bolts that are holding your bumper in position, as well as the larger oval hole near the rear
of the vehicle. It is going to be the same on the passenger side as well. :26
What we need to go ahead and do is remove these bolt brackets on both sides that is
holding on our bumper and we are going to put new hardware in that position. We are
going to go ahead and spray WD-40 lubricant on our bolts here since it is an older vehicle.
It will help us get our hardware off. In order to get the top bolt removed from the bracket
up here we are going to take loose the bumper support bar and move it in so we can get a
wrench on there
to
loosen up our nut. 1:00