Tip:
Highlight text to annotate it
X
Today on our 2013 Toyota Corolla we'll be test fitting the Sportrack Roof Mounted
Bike Rack, Part #SR4611. With a inaudible 00:00:08 traverse roof rack system on our
vehicle, we'll begin our test fit by first placing the bike rack up onto the vehicles
load bars. Starting at the front, we'll take the rubber-coated u-bolts to go around
the underside of the front bar up to the pre-drilled holes at the head of the carrier. Then take
our black wing nuts that thread down onto the u-bolts leaving them loose at this time.
We'll then take the rubber-coated black plate to go around the underside of the rear
bar. We'll then insert the bolts into the holes and tighten it down using the wing
nut. Once those wing nuts are tight, move back up to the front and finish tightening
those down as well. With the bike rack secured, we're ready to load up a bike. We'll
undo the straps at the front and rear of the bike rack and double-check to make sure our
frame clamp is loose.