Tip:
Highlight text to annotate it
X
You'll need this eraser set. In the box you'll find an user guide.
These are the erasers. And this is a jelly eraser.
These are the cupcake holders. And these are rhinestones.
These are pockets and closures. And the mold, of course.
You also need glue, chopsticks or a spoon, scissors, a knife and hot water about 80 degrees
Celsius. Put the clay in the water until it's soft
enough. Then put it in the mold and start pressing
on it so it fits. Let it harden for a minute.
Then pop it out the mold. Before melting you can cut the clay in pieces.
You see the shape isn't perfect, but you can cut the edges off.
You can melt the excess and put it in the mold again.
If you want, you can use the mold again for polymer clay.
You can cut this pattern out of the user guide. Because the paper isn't very strong, I glue
it on a stronger piece of paper. I cut this one out and folded it according
to the directions. Now I'm going to put the pieces together.
You can secure it with some pieces of tape. I cut and folded this one too. You can use
some tape or glue to secure it. If you want, you can give the boxes some more color before
folding them. These are all the pieces I've made.
Finally, glue them together. Put some small pieces in the boxes and close
them up. You can put the cakes in the cupcake holders.
With these things you can make a keychain of your eraser.
You can also add some rhinestones. Here are two examples.
Finally you can put your cake in a plastic bag.
They smell like vanilla, but you can't eat them.