Tip:
Highlight text to annotate it
X
Hello this is
how to make a wire stripping machine
proper, okay so try if you try to get a
motor with a pulley or an old fashion engine
just need a simple pulley
does not ve to to be too fast as you will see in a minute the speed of the motor
a slow-speed will work,important to try to get
on these rollers here is here you have an adjustment screw
so these will allow for the thickness of the wire okay
so you on this one on the other side so that can control the thickness
for the gauge of the wire okay
but (back to me )
so what i did I just unscrewed one side
carefully so i have got a different width
so this for small gauge in the side for large gauge
so you don't have to keep changin and ratio we"ll just start off with a
we ll start witjh a small gauge wire okay
put that one through
thats thick so I will just release that little bit
okay and that's coming through that as you can see
is coming off the wire
okay this is a, this is the next gauge up sorry its the same gauge try that again
as you can see it does not crush or spoil the wire
can say is coming off the why it doesn't
cause you're spoiling my
this is the next gauge this is a little bit thicker
so doesn't quite took it nearly got it but so too should be a bit further down
okay but we did get it that time
and this one this is a really thick gauge probably about as thick as you can
get
put up through the end
okay nearly got it there but
okay
okay that gauge these about as thick as you can get put that thru the end
try going to scrap yards for this kind of machinery
there are also a rollers is in old photocopiers
like i say can get together like this
with an adjusting screw I think that's the best type
and as you can see the rollers arent going very fast
slow-speed but manages to do it just to do it
I don't usually need an excuse to have a drink but
seeing as I have got an excuse to drink leveling look at
Just good luck make you love you don't save some money I got this machine for
free
all the adjustments cost about 5000yen
about sixty dollars so I'm sure you can pick something up to make a cheap
wire stripper / good look