Tip:
Highlight text to annotate it
X
Today on our 2007 Scion TC, well be test fitting Part # A103-white-114. This is the Kuat Alpha
Folding Locking 3 bike aluminum bike carrier. To begin our test fit, well simply slide the
bike rack shank into the hitch, line up the hitch pin hole and install our hitch pin.
We can then move to the back of the shank where well tighten down the *** securing
our bike rack to the vehicle. At this point we can go ahead and give you a few measurements.
At the bike rack, our ground clearance is 10 1/4 inches and from the closest point of
the bike rack to the back of the vehicle is 6 1/4 inches.
Well now go ahead and pull the pin at the bottom of the mask to tilt the mask down and
out of the way. We can then open our hatch. Next well go ahead and pull the pin at the
top of the mask to bring out our dual arms where we can undo the straps exposing our
cradles. Well place the bike into the cradles and bring the straps around securing our bike
to the bike rack. And there you have it, our bike is loaded and were ready to hit
the road.